Only 1 1/4 inches in diameter (it extends the bulb by about 1 1/4 inches) with a 3/8 inch bump on one side, this module will fit inside the cover of most wired-in light fixtures, such as ceiling lights with glass or plastic covers. And because it's small enough to fit under most lampshades, it's perfect for table lamps, too.

Installation's a snap. Simply screw the lamp module into the socket. Screw in a light bulb. And you're all set with remote on/off control from any X10 transmitter plugged into any AC outlet in your home, without running a single wire. The module even responds to the ALL LIGHTS ON and ALL UNITS OFF command. Does not respond to DIM commands. Rated for up to 150-watt incandescent lamps.

Order several and automate every wired-in light in your home in minutes!

Features:

• Remotely turn ON/OFF any wired-in light

• Compact design fits into most light fixtures

• Designed for spots where clearance is tight, this compact screw-in lamp module is the ideal choice for use with table lamps, inside light fixtures and in places where you don't have enough space to use a standard X10 Screw-In Lamp Module.

What is X-10 Pro?

X-10 Pro products work just like other X-10 Products, you can find in other stores. However, X-10 Pro products are designed for the professional. X-10 Pro Products are all tested before they leave the factory 100%, and are guaranteed to work. Other X-10 Products, have a 1% test rate before they leave the factory. This could cost you days of costly trial-and-error, to figure out the problem is a faulty component. Here at HomeTechnologyStore we carry only the best products for our customers. If you are looking for X-10 Pro Products, and want the best, look no further.