OnQ 4 Source - 4 Room Multi-Room Audio Kit (White)

ITEM#: H4-AU1002-KIT
In-Stock - Ships Within 24 Hours
 3 REVIEWS | WRITE A REVIEW
Quantity : 
Price: $899.00

Or Call Us at 866-523-2146

Description Reviews Accessories

OnQ LyriQ 4 Source 4 Zone Audio Kit.(White Keypads)

Quality Music, in Each Room of Your Home!

Now, the family doesn't have to share the same music over the whole house system. You can listen to any one of four audio sources in different locations at the same time. Choose your music source by using the optional handheld remote, or by using the in-wall keypad controls. Each amplified keypad has a built-in amplifier specifically for the speakers connected, giving you total independent control in every room of the house.

Integrates with OnQ Intercom Systems - If you have an intercom system on your wish-list, the OnQ audio system will integrate with all OnQ intercom systems. When the intercom is in use or doorbell pressed, the audio system will automatically mute the music. The music will resume back to normal levels once intercom functions are complete. *Installation Tip... Run 2 Cat5 cables to a 3 gang electrical box, then mount the intercom and audio keypad in the same location for a clean all-in-one look.

Kit Includes:

Features:

  • High-quality stereo music in four rooms - Easily expands to more rooms.
  • Select from four unique music sources in any room
  • 15 Watt Amplified keypad in each room
  • Optional Local source inputs allows iPod or other Connections in each room.
  • Optional Infrared remote control for easy sound management
  • Expandable up to 16 locations by adding (1) AU1022 Multi-Source Extender, (1) AU1002 Module, Power Supplies and keypads.
  • Requires (1) Power supply for every 4 zones.
  • Connects directly to the OnQ intercom system - Mute the music when there is a intercom page, or doorbell. (Intercom Sold Separate)

Also Available In


What's in the box?

  • (1) OnQ Distribution Module
  • (4) OnQ Amplified Keypads
  • (1) 3 Source Input Module
  • (1) 1 Source Input Module
  • (1) Power Supply
  • (1) Warranty Card
  • Owner's Manual

Difficulty:

Easy, this installation requires little technical know how with easy to follow instructions.

Install Time:
20 Min Per Zone (Pre-wire)
10 Min Per Zone (Finish out)

What You'll Need:

 

Product Manuals:

Basic Installation Steps

Step 1: Locate and Install Brackets (Prior to Drywall)

  1. Determine the location you wish to serve as your structured wiring location and install the optional wiring enclosure.
  2. Determine the location you wish to mount each keypad and install a single gang electrical box at each location.
  3. Determine the location you wish to mount each input module.

Step 2: Pre-Wire the House

  1. Run a cat5e wire from your structured wiring location to each keypad location. (Label Each Wire)
  2. Optional: Run a Cat5 cable from your keypad to any F7417 local source input modules (not sold in kit). (Label Each Wire)
  3. Run 3 cat5e wires from you structured wiring location to each audio input module location.

Step 3: "Finish out" Structured Wiring Location

  1. Install your AU1002 onto the structured wiring enclosure
  2. Terminate each Cat5 cable with an RJ45 connector and plug into its associated zone port.
  3. Keep system power disconnected

Step 4: "Finish out" Keypads & Input Module

  1. Terminate each keypad location with an RJ45 Cat5 connection and plug into the keypad.
  2. Punch down optional local source input Cat5 cable
  3. Install keypads to electrical boxes
  4. Install face plate covers

Step 5: "Finish out" Source Input Modules

  1. Punch down your Cat5 connections to each input module.
  2. Install modules to electrical boxes
  3. Install face plate covers
  4. Connect your source using digital interconnect cable or RCA analog cable

Step 6: Power and Test System

  1. Connect the power supply to the distribution module and input modules
  2. Test the system

How To Articles:

  • How to make cat5 connections (Coming Soon)

System Expansion:

Expand to 5-8 Zones

Expand to 9-16 Zones

  • Add 1 AU1022 Expansion Module
  • Add 1 AU1002 Module
  • Add 1 additional power supply for every 4 zones added
  • Add 1 keypad per extra zone
  • Add 1 pair of in-ceiling speakers per extra zone

Add speaker wire for each additional zone added.

Typical System Diagram
OnQ Standard Multi-Room Audio Kit
View Larger Image
Customer Reviews
Reviewed by 3 customer  
Reviewer: dwight
From: USA
Date: July 09, 2009
Customer Review
great sound. 15 watts is plenty of volume for me. It won't blow the windows out, but still plenty for me. the 20w version would be of no benefit for me. I managed to wire 2 of my cat5 cables wrong and the system worked, but not perfectly. I thought it
Reviewer: B L
From: USA
Date: October 23, 2006
Customer Review
Nice system, but with the 4 source module you dont need the intercom interrupt module. It's built in.
Reviewer: Home-Technology-Store.com
From: US
Date: April 04, 2010
HTS Editor Rating
The home technology store.com staff has provided this rating as a comparison between other items in the same category and price point.
| Page1 of 1 |