WPS21 Power Supply Hub for AVH21 and up to 7 KP21 Keypads

WPS21 Features

Dedicated connections for the AVH21 A/V hub and up to seven KP21 amplified keypads
Uses 14/4 speaker wire to deliver 26 volts of direct current in runs as long as 330 feet (100 meters)

W.H.E.N System Basic Pre-Wire - Please use the following guidelines for pre-wire:

From AVR21 receiver:
1. Single CAT5E to A/V hub (AVH21) [mandatory]
2. From 1 to 7 coax (RG-6 or RG-59). Up to 6 for video sources to video hub for distribution and 1 for
  return from hub to AVR for security camera monitor. [optional]
From AVH21 (A/V distribution hub)
1. Single CAT5E from hub to each KP21 keypad [mandatory]
2. Single coax from hub to each video display in the any KP21 room where needed [optional]
3. Coax for any security cameras to be monitored [optional]
From WPS21 (keypad power supply)
1. Single 14/4 (up to 330 ft per run) or 16/4 (up to 150 ft per run) speaker wire to each KP21
  [mandatory]
2. Single 14/4 to the AVH21 [mandatory]
From KP21
1. Speaker wire x 2 (16/2 recommended) to each speaker from the keypad [mandatory]

W.H.E.N Power Supply Distribution Module