Sensaphone 400 Remote Monitoring and Alarm Notification System Monitor and control the temperature of your cottage, or vacation home all year long. Upgrade from the Sensaphone 1104 and 1104-CS models For small businesses and property owners, the Sensaphone 400 offers an easy, inexpensive way to monitor your remote facility, cabin or vacation home. Installed in a clean indoor environment, it has built-in monitoring for power failures, temperature, and sound monitoring of audible alarms. Four external inputs on the back can be connected to various external sensors to monitor temperature, water on the floor, humidity, intrusion and more. When an alarm is detected, the 400 can notify four people by making voice phone calls. It will continue to make phone calls until someone responds to the call. The 400 also includes nonvolatile memory and a 24-hour battery backup with user-installed batteries. Key Features: Monitor up to 4 conditions, plus power failure and sound level. Notify up to 4 people with custom voice phone calls. Control a thermostat or other device automatically, manually, even remotely. No monthly fees

Input Zones:

• Flexible inputs that support:
  • Normally Open or Normally Closed contacts
  • Temperature sensors: -20°F to 150°F
  • Four channels
• Automatic input type configuration.
• Programmable recognition times.
• Internal calibration.

Alarm Notification:

• Up to 4 phone numbers
• Makes voice phone calls with customized messages for easy identification.
• Built-in alarm test function to simulate and test the notification process.
• Includes telephone Line Seizure.

Voice Messages:

• Built in vocabulary for keypad programming and sensor readings.
• Record custom voice phrases in your own voice to describe each input zone.
• Record site identification message.

Output Relay:

• Low voltage NO/NC output relay included.
• Manual or automatic alarm response switching.

Remote Access:

• Call in with any Touch-Tone phone to check the status of all monitored conditions.
• Make programming changes remotely from any Touch-Tone phone.
• Remotely control the output relay.

Local Access:

• Keypad and speaker for local programming.
• Easy voice-prompted programming.
• Password-protected to restrict programming access.

Microphone:

• Internal microphone for custom voice message recording.
• Monitor high sound alarms.
• Microphone can also be used for remote listen-in feature.

Power Supply:

• Comes with plug-in power supply.
• 24 Hour battery backup using 6 size C alkaline batteries (not included).
• Automatically monitors for power failure alarms.
• International power options available.

Built in CottageSitter Control:

• The built in relay will allow you to call in to your cabin or vacation home, check the temperature, and remotely change it to your desired temperature on a dual setback thermostat. Provide your own, or order the FGD-0064.

Monitor any of the following conditions

1. Temperature Monitoring (Built In)
2. Thermostat Control (Built In)
3. Power Failure (Built In)
4. Noise Monitoring (Built In)
5. Water Leak Detection
6. Smoke & Gas Monitoring
7. Humidity Monitoring
8. Door & Window Security
9. Room Security
10. Many Others.... Call if you have questions for a specific monitoring type question.

You set the high, and low temperature limits in your building. If the temperature gets too warm, or too cool, the system will call you, tell you the temperature, and that there is a problem.

If you use the other inputs to detect for water, or break-ins. The system can be programmed to call you and let you know what the problem is.

If there is a problem - And the sensaphone system calls you, by just pressing a couple of buttons on your phone, you can listen-in to what is happening.

Would you like to know if the power has gone out? This Sensaphone system has a built-in power sensing device. When the power goes out, and the battery back-up has been turned on. The system can call you, and let you know the power is out.