HDTV Component Video Wall Plate Kit
The CVWP Component Video Wall Plate
Kit extends high-definition and standard
definition component video wire runs up
to 500 feet over standard Cat-5 cable.
The
CVWP Kit can be used in any system that
requires component video signals be sent
over long distances, and is the ideal for
component video distribution from an
to zones equipped
with high-definition TV monitors.
The CVWP can also serve as the method of
distributing local (in-zone) component
video sources, such as DVD players and
satellite receivers, back to the head-end
for whole house distribution through an
S12 or other video matrix switcher.
The CVWP Kit consists of two single-gang,
Decora® -style wall plates: a SEND plate
and a RECEIVE plate. Dip switches on the
RECEIVE plate allow you to adjust the
video gain level and contrast based on
the length of the Cat-5 wire run. Both
plates also have F-to-F barrel connectors
for the routing of digital audio over
coaxial cable.
Features:
- Send Component Video Signals up to 500' over Cat5 Wire
- Ideal for HDTV distribution Applications
- DIP-Switch Configurable for Wire run Lengths.
- Digital Coax audio connectors single gang, Decora-Styling
Specifications:
- Send Plate
- Input Impedance - 75 Ohm
- Output Inpedance - 50 Ohm
- Bandwidth - 450Mhz (-3db)
- Channel Separation - 90db
- Power - 16Vdc
- Receive Plate
- Input Impedace - 50 Ohm
- Output Impedance - 75 Ohm
- Bandwidth - 150 Mhz (125Mhz @ 500 ft)
- THD - -50dBc
- Network Gain 1.0
- Power - Supplied by Send Plate
|