Amplified IR Connecting Block.
To be connected from your IR Distribution
Hub output, and connects directly to the IR
Flashers. Place a connecting block anywhere you need to have IR control,
and simply plug in your IR Flashers. This connecting block can support
4 dual flashers to control a total of 8 devices.
|
|
What else will I Need?
First, Connect your IR Distribution Hub all
of your IR Repeaters. Then simply connect
the output from the IR Distribution Hub to this IR
Connecting block, then plug the IR flashers
in and point them towards your Audio/Video devices you wish to control. It
is that simple.
*This sysetem requires 4 conductor Wire
for Instalaltion.
Features:
Connects four emitter ports and power supply to all Xantech infrared receivers
and keypads.
Four parallel emitter ports with 470 Ohm resistors drive 4 single or 4 dual
emitters
Uses either the 5020 power supply.
Dimensions: 3" x 1 3/4" x 13/16" (77mm x 45mm x 21mm |